Aftermarket 510-1 GD605-3 Bulldozer hydraulic Gear Pump 705-11-33100
| Cover End RPM [Max: | 32.0 LB |
| Weight: | Foot Mounted |
| Seal Material: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 25VQ21AF-1A20-LH |
| Shaft End RPM [Max: | 1 1/2 |
| Shaft Seal Type: | Flange |
| Cover End Pressure [Max: | 3/16 in |
| Displacement Shaft End (cu in/revolution): | 20 |
| PDF |
|
Product Details
| Cover End RPM [Max | 32.0 LB |
| Weight | Foot Mounted |
| Seal Material | Left Hand (CCW) |
| Pressure Port Size, Cover End | 25VQ21AF-1A20-LH |
| Shaft End RPM [Max | 1 1/2 |
| Shaft Seal Type | Flange |
| Cover End Pressure [Max | 3/16 in |
| Displacement Shaft End (cu in/revolution) | 20 |
| Cover End Flow @ RPM | 21 gpm @ 1200 rpm |
| Spline Description | 1 |
| Shaft Length | 0.875 in |
| Manufacturer Part No. | Straight w/ Key |
| Shaft Dia. | 31.5 gpm @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 25VQ |
| Minor Diameter | 2.31 in |
| Mounting Flange | F |
| Minor Diameter [Max | 1 in Flange |
| Integral Valve Configuration | Buna-N |
| Shaft End Pressure [Max | 2500 |
| Displacement Cover End (cu in/revolution) | 3000 psi |
| Major Diameter [Max | 31 1/2 |
| Major Diameter [Min | A |
| Port Type | SAE B, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| Shaft Type | Opposite Inlet Port |
| Pressure Port Size, Shaft End | 25VQ21AF-1A20-LH |
| Port Orientation - Shaft End | 4.12 |
| GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger