6221-61-1101 Japan excavator PC300-5 engine part on SA6D108-1A water pump
Model No.: | 76.0 LB |
Major Diameter [Min: | Flange Mount |
Spline Description: | Right Hand (CW) |
Cover End Flow @ RPM: | 3525VQ35A21-1CC20 |
Cover End Pressure [Max: | 3 |
Controlled Flow Rate: | Flange |
Shaft Key: | 5/16 in |
GPM @ 1,800 rpm, Cover End: | Standard Pilot |
PDF |
|
Product Details
Model No. | 76.0 LB |
Major Diameter [Min | Flange Mount |
Spline Description | Right Hand (CW) |
Cover End Flow @ RPM | 3525VQ35A21-1CC20 |
Cover End Pressure [Max | 3 |
Controlled Flow Rate | Flange |
Shaft Key | 5/16 in |
GPM @ 1,800 rpm, Cover End | Standard Pilot |
Manufacturer Part No. | 1.25 in |
Pressure Port Size, Shaft End | Straight w/ Key |
Minor Diameter [Max | 3525VQ |
Port Orientation - Cover End | 2.5 in |
Shaft End RPM [Max | Double |
Minor Diameter [Min | Buna-N |
Mounting | 2400 |
Port Orientation - Shaft End | N/A |
Seal Material | SAE C, 2 Bolt |
Major Diameter [Max | Single Shaft Seal |
Shaft Seal Type | N/A |
Shaft Type | 2500 |
Pressure Port Size, Cover End | 2400 |
Max. RPM [Max | N/A |
Displacement Cover End (cu in/revolution) | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Dia. | N/A |
Mounting Flange | N/A |
Shaft Length | N/A |
Port Type | N/A |
Shaft End Flow @ RPM | N/A |
Rotation | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Shaft End Pressure [Max | 3525VQ35A21-1CC20 |
Port Size | 3000 |
Pilot Type | 3000 |
Integral Valve Configuration | 31.5 |
GPM @ 1,800 rpm, Shaft End | 52.5 |
Weight | w/o Integral Valves |
Displacement Shaft End (cu in/revolution) | 6.9 |
Minor Diameter | Outlet Inline w/Inlet |
Relief Valve Setting | 1 in Flange |
Cover End RPM [Max | 1 1/4 in Flange |
Pump Series | 4.1 |