Hydraulic Excavator Gear Oil Pump 6204-51-1100 for Engine 4D95
| Port Size: | 118.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Pilot Type: | 4535VQ60A38-11AA20-LH |
| Major Diameter [Max: | 4 |
| Pressure Port Size, Cover End: | Flange |
| Pump Series: | N/A |
| Cover End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Port Size | 118.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Rotation | Left Hand (CCW) |
| Pilot Type | 4535VQ60A38-11AA20-LH |
| Major Diameter [Max | 4 |
| Pressure Port Size, Cover End | Flange |
| Pump Series | N/A |
| Cover End Pressure [Max | Standard Pilot |
| Shaft End RPM [Max | 1.25 in |
| Mounting | 14 Tooth Splined |
| Shaft End Pressure [Max | 4535VQ |
| GPM @ 1,800 rpm, Shaft End | 1 15/16 in |
| Manufacturer Part No. | Double |
| Weight | Buna-N |
| Shaft Length | 2200 |
| Relief Valve Setting | 1.04 in |
| GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Spline Description | 12/24 |
| Minor Diameter [Max | 2200 |
| Pressure Port Size, Shaft End | 2200 |
| Model No. | N/A |
| Shaft Dia. | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 1.248 in |
| Shaft Seal Type | 1.247 in |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Shaft Key | N/A |
| Integral Valve Configuration | N/A |
| Displacement Cover End (cu in/revolution) | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Controlled Flow Rate | 4535VQ60A38-11AA20-LH |
| Shaft Type | 3000 |
| Max. RPM [Max | 2500 |
| Mounting Flange | 57 |
| Seal Material | 90 |
| Minor Diameter [Min | w/o Integral Valves |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Cover End RPM [Max | Outlet Opposite Inlet |
| Major Diameter [Min | 1 1/4 in Flange |
| Port Type | 1 1/2 in Flange |
| Port Orientation - Cover End | 7.4 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger