Hydraulic Parts 1733496 173-3496 Cylinder Block for CAT SBS80 SBS120 Parts
| Minor Diameter [Min: | 45.0 LB |
| Pressure Port Size, Shaft End: | Flange Mount |
| Shaft Length: | Left Hand (CCW) |
| Seal Material: | 2520VQ12A11-11AA20-LH |
| Pump Series: | 2.5 |
| Rotation: | Flange |
| GPM @ 1,800 rpm, Shaft End: | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Min | 45.0 LB |
| Pressure Port Size, Shaft End | Flange Mount |
| Shaft Length | Left Hand (CCW) |
| Seal Material | 2520VQ12A11-11AA20-LH |
| Pump Series | 2.5 |
| Rotation | Flange |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Weight | Standard Pilot |
| Pilot Type | 0.875 in |
| Major Diameter [Max | 13 Tooth Splined |
| Shaft Type | 2520VQ |
| Integral Valve Configuration | 1.375 in |
| Shaft Dia. | Double |
| Model No. | Buna-N |
| Spline Description | 2700 |
| Cover End RPM [Max | 0.715 in |
| Shaft End Flow @ RPM | SAE B, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Shaft End RPM [Max | 16/32 |
| Displacement Cover End (cu in/revolution) | 2700 |
| Port Orientation - Shaft End | 2700 |
| Shaft Seal Type | N/A |
| Manufacturer Part No. | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting Flange | 0.873 in |
| Relief Valve Setting | 0.872 in |
| Mounting | N/A |
| Pressure Port Size, Cover End | N/A |
| Minor Diameter | N/A |
| Port Orientation - Cover End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max | 2520VQ12A11-11AA20-LH |
| Port Size | 3000 |
| Port Type | 3000 |
| Cover End Pressure [Max | 16.5 |
| Minor Diameter [Max | 18 |
| Cover End Flow @ RPM | w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) | 2.5 |
| GPM @ 1,800 rpm, Cover End | Outlet Opposite Inlet |
| Shaft Key | 3/4 in Flange |
| Major Diameter [Min | 1 in Flange |
| Controlled Flow Rate | 2.2 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger