CAT Excavator 362-1163 Hydraulic Oil Filter Element
| Cover End RPM [Max: | 30.0 LB |
| Shaft Dia.: | Flange Mount |
| Cover End Pressure [Max: | Right Hand (CW) |
| Shaft End Pressure [Max: | V2010-1F7S5S-11AA12 |
| Rotation: | 1 1/2 |
| GPM @ 1,800 rpm, Shaft End: | Flange |
| GPM @ 1,800 rpm, Cover End: | N/A |
| Controlled Flow Rate: | N/A |
Product Details
| Cover End RPM [Max | 30.0 LB |
| Shaft Dia. | Flange Mount |
| Cover End Pressure [Max | Right Hand (CW) |
| Shaft End Pressure [Max | V2010-1F7S5S-11AA12 |
| Rotation | 1 1/2 |
| GPM @ 1,800 rpm, Shaft End | Flange |
| GPM @ 1,800 rpm, Cover End | N/A |
| Controlled Flow Rate | N/A |
| Shaft End Flow @ RPM | 0.875 in |
| Pilot Type | 13 Tooth Splined |
| Pressure Port Size, Shaft End | V2010 |
| Minor Diameter [Max | 1 5/16 in |
| Manufacturer Part No. | Buna-N |
| Minor Diameter [Min | 3000 |
| Shaft Key | 0.728 in |
| Port Orientation - Cover End | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Relief Valve Setting | 16/32 |
| Port Type | 3000 |
| Port Size | 3000 |
| Weight | N/A |
| Seal Material | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| Shaft Length | 0.872 in |
| Shaft Type | 0.7335 in |
| Model No. | 0.7225 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Major Diameter [Max | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Minor Diameter | V2010-1F7S5S-11AA12 |
| Max. RPM [Max | 2500 |
| Pump Series | 2500 |
| Cover End Flow @ RPM | 7.5 |
| Mounting Flange | 10.5 |
| Port Orientation - Shaft End | N/A |
| Pressure Port Size, Cover End | Outlet 135° CCW from Inlet |
| Mounting | Outlet Opposite Inlet |
| Major Diameter [Min | 1/2 in SAE O-Ring |
| Shaft End RPM [Max | 3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) | 1 |
| Integral Valve Configuration | 1.39 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger