CAT Parts Steering System Tie Rod End 131-3737 for Excavator
| Shaft Seal Type: | 45.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Model No.: | 2520VQ14A5-1AD20 |
| Pressure Port Size, Cover End: | 2 1/2 |
| Minor Diameter: | Flange |
| Relief Valve Setting: | 3/16 in |
| Cover End Pressure [Max: | Standard Pilot |
Product Details
| Shaft Seal Type | 45.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Model No. | 2520VQ14A5-1AD20 |
| Pressure Port Size, Cover End | 2 1/2 |
| Minor Diameter | Flange |
| Relief Valve Setting | 3/16 in |
| Cover End Pressure [Max | Standard Pilot |
| Shaft End Pressure [Max | 0.875 in |
| Seal Material | Straight w/ Key |
| Minor Diameter [Min | 2520VQ |
| Weight | 1.9375 in |
| Port Orientation - Shaft End | Buna-N |
| Port Size | 2700 |
| Shaft End Flow @ RPM | N/A |
| Shaft Key | SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Cover End Flow @ RPM | N/A |
| Shaft Length | 2700 |
| Mounting | 2700 |
| Manufacturer Part No. | N/A |
| Controlled Flow Rate | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | N/A |
| Mounting Flange | N/A |
| Port Orientation - Cover End | N/A |
| Port Type | N/A |
| Pressure Port Size, Shaft End | N/A |
| Pump Series | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Spline Description | 2520VQ14A5-1AD20 |
| Displacement Cover End (cu in/revolution) | 3000 |
| Pilot Type | 3000 |
| Integral Valve Configuration | 7.5 |
| Max. RPM [Max | 21 |
| Rotation | w/o Integral Valves |
| Shaft Dia. | Outlet 135° CW from Inlet |
| Shaft End RPM [Max | Outlet Opposite Inlet |
| Major Diameter [Min | 3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1 in Flange |
| Shaft Type | 1.1 |
| Minor Diameter [Max | 2.77 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger