China Hydraulic Pump Replacement Parts Factory
| Pressure Port Size, Shaft End: | 76.0 LB |
| Shaft Seal Type: | Flange Mount |
| Pilot Type: | Right Hand (CW) |
| Shaft Length: | 3525VQ25A21-11CC20 |
| Cover End Flow @ RPM: | 3 |
| Pressure Port Size, Cover End: | Flange |
| Model No.: | N/A |
| Controlled Flow Rate: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 76.0 LB |
| Shaft Seal Type | Flange Mount |
| Pilot Type | Right Hand (CW) |
| Shaft Length | 3525VQ25A21-11CC20 |
| Cover End Flow @ RPM | 3 |
| Pressure Port Size, Cover End | Flange |
| Model No. | N/A |
| Controlled Flow Rate | Standard Pilot |
| Manufacturer Part No. | 1.25 in |
| GPM @ 1,800 rpm, Cover End | 14 Tooth Splined |
| Seal Material | 3525VQ |
| Minor Diameter | 1.9375 in |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Shaft Key | 2500 |
| Weight | 1.04 in |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Major Diameter [Min | 2500 |
| Mounting Flange | N/A |
| Relief Valve Setting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 1.248 in |
| Shaft End RPM [Max | 1.247 in |
| Rotation | N/A |
| Minor Diameter [Min | N/A |
| Port Size | N/A |
| Shaft End Pressure [Max | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Type | 3525VQ25A21-11CC20 |
| Mounting | 3000 |
| Shaft End Flow @ RPM | 3000 |
| Displacement Shaft End (cu in/revolution) | 31.5 |
| Shaft Dia. | 37.5 |
| Pump Series | w/o Integral Valves |
| Spline Description | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Major Diameter [Max | 1 in Flange |
| Max. RPM [Max | 1 1/4 in Flange |
| Port Orientation - Cover End | 4.12 |
| Shaft Type | 4.98 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger