Wheel Loader Steering Pump 705-51-20290 Hydraulic Gear Pump for WA250-3
| Shaft End Pressure [Max: | 45.0 LB |
| Integral Valve Configuration: | Flange Mount |
| Shaft Type: | Right Hand (CW) |
| Rotation: | 2520VQ21A5-1DD20 |
| Port Orientation - Cover End: | 2.5 |
| Shaft End Flow @ RPM: | Flange |
| Cover End RPM [Max: | 3/16 in |
| Minor Diameter: | Standard Pilot |
| PDF |
|
Product Details
| Shaft End Pressure [Max | 45.0 LB |
| Integral Valve Configuration | Flange Mount |
| Shaft Type | Right Hand (CW) |
| Rotation | 2520VQ21A5-1DD20 |
| Port Orientation - Cover End | 2.5 |
| Shaft End Flow @ RPM | Flange |
| Cover End RPM [Max | 3/16 in |
| Minor Diameter | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 0.875 in |
| Shaft Length | Straight w/ Key |
| Shaft Key | 2520VQ |
| Major Diameter [Max | 1 15/16 in |
| Displacement Cover End (cu in/revolution) | Double |
| Seal Material | Buna-N |
| Pump Series | 2500 |
| Weight | N/A |
| Minor Diameter [Min | SAE B, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Cover End Flow @ RPM | N/A |
| Mounting | 2700 |
| Spline Description | 2500 |
| Minor Diameter [Max | N/A |
| Max. RPM [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | N/A |
| Port Size | N/A |
| Mounting Flange | N/A |
| Cover End Pressure [Max | N/A |
| Shaft Seal Type | N/A |
| Pilot Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 2520VQ21A5-1DD20 |
| Shaft Dia. | 3000 |
| Major Diameter [Min | 3000 |
| Shaft End RPM [Max | 7.5 |
| Controlled Flow Rate | 31.5 |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| GPM @ 1,800 rpm, Cover End | Outlet 135° CW from Inlet |
| Pressure Port Size, Cover End | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | 3/4 in Flange |
| Model No. | 1 in Flange |
| Port Type | 1.1 |
BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine