D53A-16 D53A-1 D57-1 D58-18 Bulldozer Hydraulic Gear Pump 07429-71203
| Spline Description: | 76.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Major Diameter [Min: | Right Hand (CW) |
| Port Size: | 3525VQ25A21-11DD20 |
| Pilot Type: | 3 |
| Shaft Dia.: | Flange |
| Shaft Seal Type: | N/A |
| Max. RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Spline Description | 76.0 LB |
| Minor Diameter [Max | Flange Mount |
| Major Diameter [Min | Right Hand (CW) |
| Port Size | 3525VQ25A21-11DD20 |
| Pilot Type | 3 |
| Shaft Dia. | Flange |
| Shaft Seal Type | N/A |
| Max. RPM [Max | Standard Pilot |
| GPM @ 1,800 rpm, Cover End | 1.25 in |
| Port Orientation - Cover End | 14 Tooth Splined |
| Port Type | 3525VQ |
| Minor Diameter [Min | 1 15/16 in |
| Port Orientation - Shaft End | Buna-N |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Shaft End RPM [Max | 1.04 in |
| Minor Diameter | SAE C, 2 Bolt |
| Manufacturer Part No. | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Relief Valve Setting | 2500 |
| Seal Material | 2500 |
| Mounting Flange | N/A |
| Pressure Port Size, Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Controlled Flow Rate | 1.247 in |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Mounting | N/A |
| Shaft Type | N/A |
| Cover End Pressure [Max | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 3525VQ25A21-11DD20 |
| Cover End Flow @ RPM | 3000 |
| Model No. | 3000 |
| Pump Series | 31.5 |
| Rotation | 37.5 |
| Cover End RPM [Max | w/o Integral Valves |
| Shaft Length | Outlet 135° CW from Inlet |
| Weight | Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End | 1 in Flange |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 4.12 |
| Shaft Key | 4.98 |
BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine