3N2078 Tractor Fuel Pump For Caterpillar Engine Part D348 D349 D379
| GPM @ 1,800 rpm, Shaft End: | 26.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Port Type: | 8 gal/min @ 1200 rpm |
| Port Orientation - Cover End: | 20V8A-1B22R |
| Integral Valve Configuration: | 1.5 |
| Shaft Seal Type: | Flange |
| Seal Material: | 3/16 in |
Product Details
| GPM @ 1,800 rpm, Shaft End | 26.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Port Type | 8 gal/min @ 1200 rpm |
| Port Orientation - Cover End | 20V8A-1B22R |
| Integral Valve Configuration | 1.5 |
| Shaft Seal Type | Flange |
| Seal Material | 3/16 in |
| Pressure Port Size, Cover End | 22 |
| Model No. | 8 gpm @ 1200 rpm |
| Mounting | 0.875 in |
| Displacement Shaft End (cu in/revolution) | Straight w/ Key |
| Pilot Type | 12 / 1750 |
| Rotation | 20V |
| Controlled Flow Rate | 2.32 in |
| Minor Diameter [Min | Single |
| Minor Diameter [Max | None |
| Port Size | 3/4 in Code 61 Flange |
| Shaft Length | Buna-N |
| GPM @ 1,800 rpm, Cover End | 1800 |
| Shaft Key | 3000 psi |
| Shaft End Flow @ RPM | 12 |
| Major Diameter [Max | SAE B, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Cover End Flow @ RPM | 90° CCW from Inlet |
| Mounting Flange | 20V8A-1B22R |
| Shaft Dia. | 1.7 |
| Weight | w/o Integral Valves |
BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine