D1146 Engine Water Pump 65.06500-6139C for DH220-3 DH300-7
| Weight: | 30.0 LB |
| Mounting: | Flange Mount |
| Shaft Length: | Right Hand (CW) |
| Shaft End Pressure [Max: | V2010-1F9S2S-1DD12 |
| Pilot Type: | 1 1/2 |
| Pump Series: | Flange |
| Shaft Key: | 3/16 in |
| Model No.: | N/A |
Product Details
| Weight | 30.0 LB |
| Mounting | Flange Mount |
| Shaft Length | Right Hand (CW) |
| Shaft End Pressure [Max | V2010-1F9S2S-1DD12 |
| Pilot Type | 1 1/2 |
| Pump Series | Flange |
| Shaft Key | 3/16 in |
| Model No. | N/A |
| GPM @ 1,800 rpm, Shaft End | 0.875 in |
| Port Orientation - Shaft End | Straight w/ Key |
| Shaft End Flow @ RPM | V2010 |
| Shaft Seal Type | 2.3125 in |
| Controlled Flow Rate | Buna-N |
| Shaft End RPM [Max | 2800 |
| Manufacturer Part No. | N/A |
| Minor Diameter | SAE B, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Port Type | 3000 |
| Minor Diameter [Max | 2800 |
| Cover End Pressure [Max | N/A |
| Shaft Type | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | N/A |
| Rotation | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Mounting Flange | N/A |
| Shaft Dia. | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | V2010-1F9S2S-1DD12 |
| Port Size | 2500 |
| Cover End Flow @ RPM | 2500 |
| Seal Material | 3 |
| Major Diameter [Min | 13.5 |
| Cover End RPM [Max | N/A |
| Minor Diameter [Min | Outlet 135° CW from Inlet |
| Port Orientation - Cover End | Outlet 90° CW from Inlet |
| Relief Valve Setting | 1/2 in SAE O-Ring |
| Major Diameter [Max | 3/4 in SAE O-Ring |
| Max. RPM [Max | 0.4 |
| Pressure Port Size, Cover End | 1.81 |
MCR520 Heavy Duty Wheel Drives Radial Piston Motor Cam Ring Stator