KP1302 Dump Truck Lifting Oil Pumps KPA1302B
| Pilot Type: | 45.0 LB |
| Seal Material: | Flange Mount |
| Port Size: | Left Hand (CCW) |
| Spline Description: | 2520VQ12A5-11CC20LH |
| Model No.: | 2.5 |
| Integral Valve Configuration: | Flange |
| Weight: | N/A |
| Minor Diameter [Min: | Standard Pilot |
Product Details
| Pilot Type | 45.0 LB |
| Seal Material | Flange Mount |
| Port Size | Left Hand (CCW) |
| Spline Description | 2520VQ12A5-11CC20LH |
| Model No. | 2.5 |
| Integral Valve Configuration | Flange |
| Weight | N/A |
| Minor Diameter [Min | Standard Pilot |
| Minor Diameter [Max | 0.875 in |
| Major Diameter [Min | 13 Tooth Splined |
| Cover End Pressure [Max | 2520VQ |
| GPM @ 1,800 rpm, Shaft End | 1 3/8 in |
| Cover End RPM [Max | Double |
| Pump Series | Buna-N |
| Cover End Flow @ RPM | 2700 |
| Shaft Type | 0.715 in |
| Pressure Port Size, Cover End | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Port Orientation - Shaft End | 16/32 |
| Rotation | 2700 |
| Displacement Cover End (cu in/revolution) | 2700 |
| Shaft Key | N/A |
| Shaft Length | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting Flange | 0.873 in |
| Controlled Flow Rate | 0.872 in |
| Relief Valve Setting | N/A |
| Port Type | N/A |
| Shaft End RPM [Max | N/A |
| Pressure Port Size, Shaft End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Mounting | 2520VQ12A5-11CC20LH |
| Max. RPM [Max | 3000 |
| Minor Diameter | 3000 |
| Displacement Shaft End (cu in/revolution) | 2.5 |
| Shaft End Flow @ RPM | 18 |
| Major Diameter [Max | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Shaft Dia. | Outlet Inline w/Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
| Manufacturer Part No. | 1 in Flange |
| Shaft End Pressure [Max | 1.1 |
MCR520 Heavy Duty Wheel Drives Radial Piston Motor Cam Ring Stator