Hydraulic Oil Gear Pumps 705-51-30190 for Bulldozer D85
| Displacement Cover End (cu in/revolution): | 26.0 LB |
| Port Orientation - Shaft End: | Flange Mount |
| Port Size: | Right Hand (CW) |
| Major Diameter [Max: | 8 gal/min @ 1200 rpm |
| Port Orientation - Cover End: | 1.5 |
| Model No.: | Flange |
| Spline Description: | 3/16 in |
| Controlled Flow Rate: | 22 |
Product Details
| Displacement Cover End (cu in/revolution) | 26.0 LB |
| Port Orientation - Shaft End | Flange Mount |
| Port Size | Right Hand (CW) |
| Major Diameter [Max | 8 gal/min @ 1200 rpm |
| Port Orientation - Cover End | 1.5 |
| Model No. | Flange |
| Spline Description | 3/16 in |
| Controlled Flow Rate | 22 |
| Relief Valve Setting | 8 gpm @ 1200 rpm |
| Cover End RPM [Max | 0.875 in |
| Minor Diameter | Straight w/ Key |
| Pilot Type | 12 gpm @ 1750 rpm |
| Shaft Length | 20V |
| Shaft End RPM [Max | 2.32 in |
| Seal Material | 02-102519 |
| Pressure Port Size, Shaft End | Single |
| GPM @ 1,800 rpm, Shaft End | None |
| Mounting | 3/4 in Code 61 Flange |
| Max. RPM [Max | Viton |
| Displacement Shaft End (cu in/revolution) | 1800 |
| Major Diameter [Min | 3000 psi |
| Rotation | 12 |
| Cover End Flow @ RPM | SAE B, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Pump Series | Inline w/ Inlet |
| Manufacturer Part No. | 1.7 |
| GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
MCR520 Heavy Duty Wheel Drives Radial Piston Motor Cam Ring Stator