6754711012 Diesel Fuel Injection Pump for PC240-8 PC200-8
Seal Material: | 32.0 LB |
Minor Diameter [Min: | Flange Mount |
Max. RPM [Max: | Right Hand (CW) |
Displacement Cover End (cu in/revolution): | 12 gal/min @ 1200 rpm |
Spline Description: | 25VQ12A-11B20 |
Major Diameter [Min: | 1.5 |
Minor Diameter: | Flange |
Mounting: | N/A |
PDF |
|
Product Details
Seal Material | 32.0 LB |
Minor Diameter [Min | Flange Mount |
Max. RPM [Max | Right Hand (CW) |
Displacement Cover End (cu in/revolution) | 12 gal/min @ 1200 rpm |
Spline Description | 25VQ12A-11B20 |
Major Diameter [Min | 1.5 |
Minor Diameter | Flange |
Mounting | N/A |
Pressure Port Size, Cover End | 20 |
Rotation | 12 gpm @ 1200 rpm |
Shaft Seal Type | 11 |
Weight | 0.875 in |
Cover End Flow @ RPM | 13 Tooth Splined |
Shaft End RPM [Max | 18 gpm @ 1800 rpm |
Pump Series | 25VQ |
Shaft Length | 1 3/8 in |
Model No. | Single |
Port Orientation - Cover End | None |
Shaft Type | 1 in Flange |
Mounting Flange | Buna-N |
Manufacturer Part No. | 2700 |
GPM @ 1,800 rpm, Cover End | 3000 psi |
GPM @ 1,800 rpm, Shaft End | 18 |
Pressure Port Size, Shaft End | A |
Pilot Type | SAE B, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Integral Valve Configuration | 90° CCW from Inlet |
Shaft Key | 25VQ12A-11B20 |
Shaft End Pressure [Max | 2.5 |
Displacement Shaft End (cu in/revolution) | w/o Integral Valves |