Excavator Hydraulic Gear Pump 126-2016 /1262016 for Caterpillar 318C
| Mounting Flange: | 32.0 LB |
| Mounting: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): | 12 gal/min @ 1200 rpm |
| Shaft Dia.: | 25VQ12C-1C20 |
| Controlled Flow Rate: | 1.5 |
| Cover End Pressure [Max: | Flange |
| Shaft End Flow @ RPM: | 3/16 in |
Product Details
| Mounting Flange | 32.0 LB |
| Mounting | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) | 12 gal/min @ 1200 rpm |
| Shaft Dia. | 25VQ12C-1C20 |
| Controlled Flow Rate | 1.5 |
| Cover End Pressure [Max | Flange |
| Shaft End Flow @ RPM | 3/16 in |
| GPM @ 1,800 rpm, Cover End | 20 |
| Port Type | 12 gpm @ 1200 rpm |
| Integral Valve Configuration | 1 |
| Major Diameter [Max | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | Straight w/ Key |
| Minor Diameter [Min | 18 gpm @ 1800 rpm |
| Spline Description | 25VQ |
| Pressure Port Size, Shaft End | 2.31 in |
| Model No. | Single |
| Shaft End RPM [Max | None |
| Pump Series | SAE-16 |
| Weight | Buna-N |
| Manufacturer Part No. | 2700 |
| Port Orientation - Cover End | 3000 psi |
| Minor Diameter | 18 |
| Port Orientation - Shaft End | C |
| Relief Valve Setting | SAE B, 2 Bolt |
| Shaft Key | Single Shaft Seal |
| Pilot Type | Inline w/ Inlet |
| Shaft Length | 25VQ12C-1C20 |
| Minor Diameter [Max | 2.5 |
| Rotation | w/o Integral Valves |
MCR520 Heavy Duty Wheel Drives Radial Piston Motor Cam Ring Stator