Work Steering Gear Transmission Pump 6P7358 for Loader 980C; 980F
| Minor Diameter [Max: | 76.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Controlled Flow Rate: | Right Hand (CW) |
| Shaft Length: | 3525VQ35A21-11DD20 |
| Displacement Shaft End (cu in/revolution): | 3 |
| Port Orientation - Cover End: | Flange |
| Shaft Key: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max | 76.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Controlled Flow Rate | Right Hand (CW) |
| Shaft Length | 3525VQ35A21-11DD20 |
| Displacement Shaft End (cu in/revolution) | 3 |
| Port Orientation - Cover End | Flange |
| Shaft Key | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Max. RPM [Max | 1.25 in |
| Pressure Port Size, Shaft End | 14 Tooth Splined |
| Cover End RPM [Max | 3525VQ |
| Model No. | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Weight | 2400 |
| Shaft Dia. | 1.04 in |
| Port Size | SAE C, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Cover End Flow @ RPM | 12/24 |
| Pilot Type | 2500 |
| Shaft End Pressure [Max | 2400 |
| Rotation | N/A |
| Major Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 1.248 in |
| Shaft Type | 1.247 in |
| GPM @ 1,800 rpm, Cover End | N/A |
| Mounting | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Spline Description | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Seal Material | 3525VQ35A21-11DD20 |
| Pump Series | 3000 |
| Displacement Cover End (cu in/revolution) | 3000 |
| Shaft End RPM [Max | 31.5 |
| Port Type | 52.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Relief Valve Setting | Outlet 135° CW from Inlet |
| Cover End Pressure [Max | Outlet 90° CW from Inlet |
| Mounting Flange | 1 in Flange |
| Minor Diameter [Min | 1 1/4 in Flange |
| Manufacturer Part No. | 4.12 |
| Major Diameter [Max | 6.88 |
MCR520 Heavy Duty Wheel Drives Radial Piston Motor Cam Ring Stator