4W7589 Hydraulic Excavator Water Pump fits for CAT
Displacement Shaft End (cu in/revolution): | 75.0 LB |
Minor Diameter [Max: | Flange Mount |
GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
Major Diameter [Max: | 60 gal/min @ 1200 rpm |
Port Orientation - Cover End: | 45V60A-11A22R |
Relief Valve Setting: | 3 |
Major Diameter [Min: | Flange |
Shaft End Pressure [Max: | N/A |
PDF |
|
Product Details
Displacement Shaft End (cu in/revolution) | 75.0 LB |
Minor Diameter [Max | Flange Mount |
GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
Major Diameter [Max | 60 gal/min @ 1200 rpm |
Port Orientation - Cover End | 45V60A-11A22R |
Relief Valve Setting | 3 |
Major Diameter [Min | Flange |
Shaft End Pressure [Max | N/A |
Shaft Seal Type | 22 |
Shaft Dia. | 60 gpm @ 1200 rpm |
GPM @ 1,800 rpm, Cover End | 11 |
Shaft Key | 1.25 in |
Max. RPM [Max | 14 Tooth Splined |
Pump Series | 90 / 1800 |
Integral Valve Configuration | 45V |
Shaft End RPM [Max | 1.9375 in |
Pilot Type | Single |
Shaft End Flow @ RPM | None |
Rotation | 1 1/2 in Code 61 Flange |
Model No. | Buna-N |
Cover End Pressure [Max | 1800 |
Displacement Cover End (cu in/revolution) | 2500 psi |
Minor Diameter [Min | 90 |
Port Size | SAE C, 2 Bolt |
Pressure Port Size, Cover End | Single Shaft Seal |
Port Type | Opposite Inlet Port |
Spline Description | 45V60A-11A22R |
Mounting Flange | 11.8 |
Pressure Port Size, Shaft End | w/o Integral Valves |