HGP-4A Flange or Foot Mounting Hydraulic Gear Pump HGP4A
| Manufacturer Part No.: | 76.0 LB |
| Pressure Port Size, Cover End: | Flange Mount |
| Shaft Key: | Left Hand (CCW) |
| Max. RPM [Max: | 3525VQ25A21-11CC20-LH |
| Major Diameter [Max: | 3 |
| Spline Description: | Flange |
| Seal Material: | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. | 76.0 LB |
| Pressure Port Size, Cover End | Flange Mount |
| Shaft Key | Left Hand (CCW) |
| Max. RPM [Max | 3525VQ25A21-11CC20-LH |
| Major Diameter [Max | 3 |
| Spline Description | Flange |
| Seal Material | N/A |
| Weight | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Cover End Flow @ RPM | 14 Tooth Splined |
| Minor Diameter | 3525VQ |
| Pilot Type | 1.9375 in |
| Port Type | Double |
| Minor Diameter [Min | Buna-N |
| Cover End RPM [Max | 2500 |
| Port Orientation - Shaft End | 1.04 in |
| Shaft End RPM [Max | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Controlled Flow Rate | 2500 |
| Mounting Flange | 2500 |
| Shaft Length | N/A |
| Displacement Shaft End (cu in/revolution) | 5 |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Shaft End Flow @ RPM | 1.247 in |
| Shaft Type | N/A |
| Rotation | N/A |
| Model No. | N/A |
| Cover End Pressure [Max | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft Dia. | 3525VQ25A21-11CC20-LH |
| Pump Series | 3000 |
| Port Orientation - Cover End | 3000 |
| Displacement Cover End (cu in/revolution) | 31.5 |
| Shaft End Pressure [Max | 37.5 |
| Minor Diameter [Max | w/o Integral Valves |
| Relief Valve Setting | Outlet 45° CW from Inlet |
| Major Diameter [Min | Outlet Inline w/Inlet |
| Pressure Port Size, Shaft End | 1 in Flange |
| Port Size | 1 1/4 in Flange |
| Mounting | 4.1 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale