VTM42 Power Steering Pump Assembly for Vickers Replacement
| Spline Description: | 75.0 LB |
| Minor Diameter: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Mounting: | 3520VQ30A8-11CC20LH |
| Displacement Shaft End (cu in/revolution): | 3 |
| Shaft Key: | Flange |
| Integral Valve Configuration: | N/A |
| Shaft End Flow @ RPM: | Standard Pilot |
| PDF |
|
Product Details
| Spline Description | 75.0 LB |
| Minor Diameter | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Mounting | 3520VQ30A8-11CC20LH |
| Displacement Shaft End (cu in/revolution) | 3 |
| Shaft Key | Flange |
| Integral Valve Configuration | N/A |
| Shaft End Flow @ RPM | Standard Pilot |
| Model No. | 1.25 in |
| Major Diameter [Min | 14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End | 3520VQ |
| Pressure Port Size, Cover End | 1.9375 in |
| Shaft End RPM [Max | Buna-N |
| Port Type | 2500 |
| Pressure Port Size, Shaft End | 1.04 in |
| Pump Series | SAE C, 2 Bolt |
| Rotation | Single Shaft Seal |
| Minor Diameter [Max | 12/24 |
| Relief Valve Setting | 2500 |
| Port Size | 2500 |
| Shaft Type | N/A |
| Major Diameter [Max | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Mounting Flange | 1.248 in |
| Cover End RPM [Max | 1.247 in |
| Manufacturer Part No. | N/A |
| Shaft End Pressure [Max | N/A |
| Cover End Pressure [Max | N/A |
| Displacement Cover End (cu in/revolution) | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | 3520VQ30A8-11CC20LH |
| Shaft Dia. | 3000 |
| Port Orientation - Shaft End | 3000 |
| Seal Material | 12 |
| Port Orientation - Cover End | 45 |
| Minor Diameter [Min | w/o Integral Valves |
| Shaft Length | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet Inline w/Inlet |
| Weight | 3/4 in Flange |
| Shaft Seal Type | 1 1/4 in Flange |
| Controlled Flow Rate | 1.67 |
| Max. RPM [Max | 5.96 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale