Excavator PC75UU Hydraulic Gear Pump Assy Pilot Pump 705-24-29090
| Pilot Type: | 76.0 LB |
| Mounting Flange: | Flange Mount |
| Minor Diameter [Min: | Left Hand (CCW) |
| Manufacturer Part No.: | 3525V35A17-11AA22L |
| Cover End RPM [Max: | 3 |
| Relief Valve Setting: | Flange |
| GPM @ 1,800 rpm, Cover End: | N/A |
| Shaft Seal Type: | Standard Pilot |
Product Details
| Pilot Type | 76.0 LB |
| Mounting Flange | Flange Mount |
| Minor Diameter [Min | Left Hand (CCW) |
| Manufacturer Part No. | 3525V35A17-11AA22L |
| Cover End RPM [Max | 3 |
| Relief Valve Setting | Flange |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Seal Type | Standard Pilot |
| Pressure Port Size, Shaft End | 1.375 in |
| Integral Valve Configuration | 14 Tooth Splined |
| Displacement Cover End (cu in/revolution) | 3525V |
| Pressure Port Size, Cover End | 2.3125 in |
| Mounting | Buna-N |
| Displacement Shaft End (cu in/revolution) | 1800 |
| Pump Series | 1.055 in |
| Model No. | SAE C, 2 Bolt |
| Port Type | Single Shaft Seal |
| Weight | 12/24 |
| Shaft End Pressure [Max | 1800 |
| Minor Diameter | 1800 |
| Max. RPM [Max | N/A |
| Seal Material | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 1.25 in |
| Shaft End Flow @ RPM | 1.247 in |
| Major Diameter [Min | 1.06 in |
| Cover End Pressure [Max | 1.05 in |
| Cover End Flow @ RPM | N/A |
| Shaft Key | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 3525V35A17-11AA22L |
| Spline Description | 2500 |
| Port Orientation - Shaft End | 2500 |
| Shaft End RPM [Max | 25.5 |
| Controlled Flow Rate | 52.5 |
| Port Size | N/A |
| GPM @ 1,800 rpm, Shaft End | Outlet 135° CCW from Inlet |
| Shaft Type | Outlet Opposite Inlet |
| Shaft Length | 1 in Code 61 |
| Port Orientation - Cover End | 1 1/4 in Code 61 |
| Rotation | 3.4 |
| Shaft Dia. | 6.8 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale