CAT Excavator Crankcase Breather 4N4668 for Engine Parts
| Minor Diameter: | 45.0 LB |
| Weight: | Flange Mount |
| Relief Valve Setting: | Left Hand (CCW) |
| Pump Series: | 2520VQ14E14-11CC20-LH |
| Minor Diameter [Min: | 2.5 |
| Displacement Cover End (cu in/revolution): | Flange |
| Port Orientation - Shaft End: | N/A |
| Port Orientation - Cover End: | Standard Pilot |
Product Details
| Minor Diameter | 45.0 LB |
| Weight | Flange Mount |
| Relief Valve Setting | Left Hand (CCW) |
| Pump Series | 2520VQ14E14-11CC20-LH |
| Minor Diameter [Min | 2.5 |
| Displacement Cover End (cu in/revolution) | Flange |
| Port Orientation - Shaft End | N/A |
| Port Orientation - Cover End | Standard Pilot |
| Model No. | 0.875 in |
| Pilot Type | 13 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 2.8 |
| Cover End Pressure [Max | 1 3/8 in |
| Integral Valve Configuration | Double |
| Manufacturer Part No. | Buna-N |
| Max. RPM [Max | 2700 |
| Shaft Seal Type | 0.715 in |
| Port Type | SAE B, 2 Bolt |
| Shaft Key | Single Shaft Seal |
| Cover End Flow @ RPM | 16/32 |
| Major Diameter [Max | 2700 |
| Cover End RPM [Max | 2700 |
| Spline Description | N/A |
| Shaft End Flow @ RPM | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 0.873 in |
| Mounting Flange | 0.872 in |
| Shaft Length | N/A |
| Shaft End RPM [Max | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Rotation | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Min | 2520VQ14E14-11CC20-LH |
| Shaft End Pressure [Max | 2000 |
| Seal Material | 3000 |
| Port Size | 21 |
| Pressure Port Size, Shaft End | 21 |
| Mounting | w/o Integral Valves |
| Minor Diameter [Max | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| Controlled Flow Rate | 1 1/16 in SAE O-Ring |
| Shaft Dia. | 1 in Flange |
| Pressure Port Size, Cover End | 2.8 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale