C18 Engine Parts Piston Ring 238-2707/ 246-5659 /223-9159
| Max. RPM [Max: | 76.0 LB |
| Manufacturer Part No.: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Shaft Key: | 3525VQ35A21-11DD20 |
| Spline Description: | 3 |
| Weight: | Flange |
| Displacement Cover End (cu in/revolution): | N/A |
| Cover End Pressure [Max: | Standard Pilot |
Product Details
| Max. RPM [Max | 76.0 LB |
| Manufacturer Part No. | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Shaft Key | 3525VQ35A21-11DD20 |
| Spline Description | 3 |
| Weight | Flange |
| Displacement Cover End (cu in/revolution) | N/A |
| Cover End Pressure [Max | Standard Pilot |
| Mounting Flange | 1.25 in |
| Minor Diameter [Max | 14 Tooth Splined |
| Port Orientation - Cover End | 3525VQ |
| Port Size | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Controlled Flow Rate | 2400 |
| Integral Valve Configuration | 1.04 in |
| Shaft End Pressure [Max | SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| Mounting | 12/24 |
| Shaft Type | 2500 |
| Relief Valve Setting | 2400 |
| Minor Diameter | N/A |
| Port Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. | 1.248 in |
| Shaft Length | 1.247 in |
| Minor Diameter [Min | N/A |
| Major Diameter [Min | N/A |
| Shaft Seal Type | N/A |
| Rotation | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 3525VQ35A21-11DD20 |
| Shaft End RPM [Max | 3000 |
| Pressure Port Size, Shaft End | 3000 |
| Model No. | 31.5 |
| Displacement Shaft End (cu in/revolution) | 52.5 |
| Major Diameter [Max | w/o Integral Valves |
| Cover End RPM [Max | Outlet 135° CW from Inlet |
| Pilot Type | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | 1 in Flange |
| Seal Material | 1 1/4 in Flange |
| Cover End Flow @ RPM | 4.12 |
| Pump Series | 6.88 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale