Piston Pump 358-5004 for Excavator Cat 306e 307e Hydraulic Main Pump
Pilot Type: | 50.0 LB |
Displacement Shaft End (cu in/revolution): | Flange Mount |
Weight: | Right Hand (CW) |
Displacement Cover End (cu in/revolution): | 38 gal/min @ 1200 rpm |
Controlled Flow Rate: | 35VQ38A-11C20 |
Pump Series: | 2 |
Mounting: | Flange |
Major Diameter [Min: | N/A |
PDF |
|
Product Details
Pilot Type | 50.0 LB |
Displacement Shaft End (cu in/revolution) | Flange Mount |
Weight | Right Hand (CW) |
Displacement Cover End (cu in/revolution) | 38 gal/min @ 1200 rpm |
Controlled Flow Rate | 35VQ38A-11C20 |
Pump Series | 2 |
Mounting | Flange |
Major Diameter [Min | N/A |
Manufacturer Part No. | 20 |
Spline Description | 38 gpm @ 1200 rpm |
Cover End Flow @ RPM | 11 |
Shaft Length | 1.25 in |
Seal Material | 14 Tooth Splined |
Shaft Type | 57 gpm @ 1800 rpm |
Relief Valve Setting | 35VQ |
Shaft End RPM [Max | 1 15/16 in |
Port Orientation - Shaft End | Single |
GPM @ 1,800 rpm, Cover End | None |
Mounting Flange | 1 1/4 in Flange |
Port Size | Buna-N |
Model No. | 2400 |
Max. RPM [Max | 3000 psi |
Minor Diameter | 57 |
Shaft End Flow @ RPM | A |
Shaft Key | SAE C, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Pressure Port Size, Cover End | Inline w/ Inlet |
Minor Diameter [Min | 35VQ38A-11C20 |
Port Type | 7.4 |
Shaft End Pressure [Max | w/o Integral Valves |