High Pressure 3525V hydraulic vane pump for Vickers
| Mounting: | 30.0 LB |
| Max. RPM [Max: | Flange Mount |
| Pump Series: | Right Hand (CW) |
| Port Size: | V2010-1F11S7S-1BC12 |
| Shaft Key: | 1.5 |
| Pilot Type: | Flange |
| Cover End RPM [Max: | 3/16 in |
| Shaft End Pressure [Max: | N/A |
Product Details
| Mounting | 30.0 LB |
| Max. RPM [Max | Flange Mount |
| Pump Series | Right Hand (CW) |
| Port Size | V2010-1F11S7S-1BC12 |
| Shaft Key | 1.5 |
| Pilot Type | Flange |
| Cover End RPM [Max | 3/16 in |
| Shaft End Pressure [Max | N/A |
| Shaft Length | 0.875 in |
| Minor Diameter | Straight w/ Key |
| Shaft End RPM [Max | V2010 |
| Model No. | 2 5/16 in |
| Mounting Flange | Double |
| Cover End Flow @ RPM | Buna-N |
| Minor Diameter [Min | 2500 |
| Displacement Cover End (cu in/revolution) | N/A |
| Relief Valve Setting | SAE B, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Minor Diameter [Max | N/A |
| Port Type | 2800 |
| Shaft Type | 2500 |
| Seal Material | N/A |
| Major Diameter [Max | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Integral Valve Configuration | N/A |
| Displacement Shaft End (cu in/revolution) | 2.2 |
| Major Diameter [Min | N/A |
| Pressure Port Size, Cover End | N/A |
| Shaft Seal Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Rotation | V2010-1F11S7S-1BC12 |
| Shaft End Flow @ RPM | 2000 |
| Shaft Dia. | 2500 |
| GPM @ 1,800 rpm, Cover End | 10.5 |
| Weight | 16.5 |
| Spline Description | N/A |
| Pressure Port Size, Shaft End | Outlet 45° CW from Inlet |
| Port Orientation - Cover End | Outlet 90° CCW from Inlet |
| Cover End Pressure [Max | 1/2 in SAE O-Ring |
| Manufacturer Part No. | 3/4 in SAE O-Ring |
| Controlled Flow Rate | 1.4 |
PL42 PL44 Poclain Spare Parts Hydraulic Motor Piston Pin