Hydraulic Gear Pump 705-11-32110 for Komatsu Bulldozer D85 Parts
| Pressure Port Size, Cover End: | 76.0 LB |
| Rotation: | Flange Mount |
| Major Diameter [Min: | Left Hand (CCW) |
| Seal Material: | 3525V35A17-11AA22L |
| Minor Diameter [Min: | 3 |
| Shaft Seal Type: | Flange |
| Port Size: | N/A |
| Integral Valve Configuration: | Standard Pilot |
Product Details
| Pressure Port Size, Cover End | 76.0 LB |
| Rotation | Flange Mount |
| Major Diameter [Min | Left Hand (CCW) |
| Seal Material | 3525V35A17-11AA22L |
| Minor Diameter [Min | 3 |
| Shaft Seal Type | Flange |
| Port Size | N/A |
| Integral Valve Configuration | Standard Pilot |
| Shaft Type | 1.375 in |
| Minor Diameter [Max | 14 Tooth Splined |
| Shaft Key | 3525V |
| Cover End Flow @ RPM | 2.3125 in |
| Minor Diameter | Buna-N |
| Pump Series | 1800 |
| Max. RPM [Max | 1.055 in |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Model No. | 12/24 |
| Weight | 1800 |
| Pilot Type | 1800 |
| Port Orientation - Cover End | N/A |
| Controlled Flow Rate | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.25 in |
| Port Orientation - Shaft End | 1.247 in |
| Manufacturer Part No. | 1.06 in |
| Relief Valve Setting | 1.05 in |
| Shaft End Flow @ RPM | N/A |
| Cover End RPM [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 3525V35A17-11AA22L |
| Mounting Flange | 2500 |
| Shaft End Pressure [Max | 2500 |
| Shaft End RPM [Max | 25.5 |
| Major Diameter [Max | 52.5 |
| Spline Description | N/A |
| Displacement Shaft End (cu in/revolution) | Outlet 135° CCW from Inlet |
| Shaft Length | Outlet Opposite Inlet |
| Pressure Port Size, Shaft End | 1 in Code 61 |
| Mounting | 1 1/4 in Code 61 |
| Port Type | 3.4 |
| Shaft Dia. | 6.8 |
PL42 PL44 Poclain Spare Parts Hydraulic Motor Piston Pin