CAT Excavator 345C 2668034 266-8034 Gear Pump Fan Hydraulic Pump
| Pump Series: | 45.0 LB |
| Relief Valve Setting: | Flange Mount |
| Port Type: | Right Hand (CW) |
| Shaft Seal Type: | 2520V12A5-11AB22R |
| Shaft End Pressure [Max: | 2 1/2 |
| Shaft Key: | Flange |
| Cover End RPM [Max: | N/A |
| Port Size: | Standard Pilot |
| PDF |
|
Product Details
| Pump Series | 45.0 LB |
| Relief Valve Setting | Flange Mount |
| Port Type | Right Hand (CW) |
| Shaft Seal Type | 2520V12A5-11AB22R |
| Shaft End Pressure [Max | 2 1/2 |
| Shaft Key | Flange |
| Cover End RPM [Max | N/A |
| Port Size | Standard Pilot |
| Minor Diameter [Min | 1.09 in |
| Major Diameter [Min | 13 Tooth Splined |
| Minor Diameter | 2520V |
| Pilot Type | 1.75 in |
| Integral Valve Configuration | Buna-N |
| Shaft End Flow @ RPM | 1800 |
| Max. RPM [Max | 0.7285 in |
| Shaft End RPM [Max | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Pressure Port Size, Cover End | 16/32 |
| GPM @ 1,800 rpm, Shaft End | 1800 |
| Shaft Type | 1800 |
| Manufacturer Part No. | N/A |
| Shaft Length | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 0.873 in |
| Mounting Flange | 0.872 in |
| Shaft Dia. | 0.734 in |
| Port Orientation - Shaft End | 0.723 in |
| Seal Material | N/A |
| Weight | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Mounting | 2520V12A5-11AB22R |
| Spline Description | 3000 |
| Cover End Flow @ RPM | 2500 |
| Rotation | 7.5 |
| Displacement Shaft End (cu in/revolution) | 18 |
| Controlled Flow Rate | N/A |
| Port Orientation - Cover End | Outlet 45° CCW from Inlet |
| Major Diameter [Max | Outlet Opposite Inlet |
| Minor Diameter [Max | 3/4 in Code 61 |
| GPM @ 1,800 rpm, Cover End | 1 in Code 61 |
| Model No. | 1.1 |
| Cover End Pressure [Max | 2.5 |
PL42 PL44 Poclain Spare Parts Hydraulic Motor Piston Pin