SH200-5 Excavator Engine 4HK1 Water Pump 8-98022822-1
| Displacement Shaft End (cu in/revolution): | 101.0 LB |
| Port Orientation - Shaft End: | Flange Mount |
| Shaft Type: | Left Hand (CCW) |
| Pump Series: | 4525VQ60A21-11AA20-LH |
| Shaft Seal Type: | 3 1/2 |
| Shaft Key: | Flange |
| Manufacturer Part No.: | N/A |
| Shaft Length: | Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) | 101.0 LB |
| Port Orientation - Shaft End | Flange Mount |
| Shaft Type | Left Hand (CCW) |
| Pump Series | 4525VQ60A21-11AA20-LH |
| Shaft Seal Type | 3 1/2 |
| Shaft Key | Flange |
| Manufacturer Part No. | N/A |
| Shaft Length | Standard Pilot |
| Pressure Port Size, Shaft End | 1.25 in |
| Controlled Flow Rate | 14 Tooth Splined |
| Minor Diameter [Max | 4525VQ |
| Max. RPM [Max | 1.9375 in |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Minor Diameter [Min | 2200 |
| Rotation | 1.04 in |
| Port Orientation - Cover End | SAE C, 2 Bolt |
| Model No. | Single Shaft Seal |
| Shaft Dia. | 12/24 |
| GPM @ 1,800 rpm, Cover End | 2200 |
| Weight | 2200 |
| Port Size | N/A |
| Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 1.248 in |
| Relief Valve Setting | 1.247 in |
| Shaft End Pressure [Max | N/A |
| Mounting Flange | N/A |
| Cover End Pressure [Max | N/A |
| Port Type | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 4525VQ60A21-11AA20-LH |
| Mounting | 3000 |
| Integral Valve Configuration | 2500 |
| Major Diameter [Max | 31.5 |
| Major Diameter [Min | 90 |
| Spline Description | w/o Integral Valves |
| Shaft End RPM [Max | Outlet 135° CCW from Inlet |
| Cover End Flow @ RPM | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Pilot Type | 1 1/2 in Flange |
| Minor Diameter | 4.12 |
| Shaft End Flow @ RPM | 11.8 |
MSE18 Stator Cam Ring for Poclain Radial Piston Hydraulic Motor