VA20 VG20 Series Multiple Directional Control Valve Hydraulic
Minor Diameter: | 45.0 LB |
Mounting Flange: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Shaft Key: | 2520VQ17A11-11DB20 |
Shaft Dia.: | 2 1/2 |
Relief Valve Setting: | Flange |
Max. RPM [Max: | N/A |
Port Orientation - Shaft End: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter | 45.0 LB |
Mounting Flange | Flange Mount |
Shaft Length | Right Hand (CW) |
Shaft Key | 2520VQ17A11-11DB20 |
Shaft Dia. | 2 1/2 |
Relief Valve Setting | Flange |
Max. RPM [Max | N/A |
Port Orientation - Shaft End | Standard Pilot |
Minor Diameter [Max | 0.875 in |
Shaft Type | 13 Tooth Splined |
Port Size | 2520VQ |
Integral Valve Configuration | 1 3/8 in |
Rotation | Buna-N |
Cover End Flow @ RPM | 2500 |
Manufacturer Part No. | 0.715 in |
Pump Series | SAE B, 2 Bolt |
Pressure Port Size, Cover End | Single Shaft Seal |
Shaft End Flow @ RPM | 16/32 |
Major Diameter [Min | 2700 |
Cover End RPM [Max | 2500 |
Controlled Flow Rate | N/A |
Model No. | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Minor Diameter [Min | 0.873 in |
GPM @ 1,800 rpm, Shaft End | 0.872 in |
Seal Material | N/A |
Displacement Shaft End (cu in/revolution) | N/A |
Port Orientation - Cover End | N/A |
Pilot Type | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Spline Description | 2520VQ17A11-11DB20 |
Shaft End RPM [Max | 3000 |
Major Diameter [Max | 3000 |
Port Type | 16.5 |
Cover End Pressure [Max | 25.5 |
Weight | w/o Integral Valves |
Mounting | Outlet 45° CCW from Inlet |
Shaft End Pressure [Max | Outlet 90° CW from Inlet |
GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
Shaft Seal Type | 1 in Flange |
Displacement Cover End (cu in/revolution) | 2.22 |
Pressure Port Size, Shaft End | 3.37 |