Replacement CAT 6E5831 Hydraulic Vane Pump Construction Machinery Parts
| Port Orientation - Cover End: | 75.0 LB |
| Spline Description: | Flange Mount |
| Cover End RPM [Max: | Right Hand (CW) |
| Mounting Flange: | 3520VQ25A11-11AA20 |
| Cover End Pressure [Max: | 3 |
| Minor Diameter: | Flange |
| Shaft Dia.: | N/A |
| Model No.: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End | 75.0 LB |
| Spline Description | Flange Mount |
| Cover End RPM [Max | Right Hand (CW) |
| Mounting Flange | 3520VQ25A11-11AA20 |
| Cover End Pressure [Max | 3 |
| Minor Diameter | Flange |
| Shaft Dia. | N/A |
| Model No. | Standard Pilot |
| Controlled Flow Rate | 1.25 in |
| Pressure Port Size, Shaft End | 14 Tooth Splined |
| Pump Series | 3520VQ |
| Major Diameter [Max | 1 15/16 in |
| Manufacturer Part No. | Buna-N |
| Minor Diameter [Max | 2500 |
| Shaft Seal Type | 1.04 in |
| Pressure Port Size, Cover End | SAE C, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Shaft End RPM [Max | 2500 |
| Relief Valve Setting | 2500 |
| Major Diameter [Min | N/A |
| Pilot Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Seal Material | 1.248 in |
| Mounting | 1.247 in |
| Shaft Length | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Port Orientation - Shaft End | N/A |
| Weight | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Max. RPM [Max | 3520VQ25A11-11AA20 |
| Cover End Flow @ RPM | 3000 |
| Integral Valve Configuration | 3000 |
| Displacement Cover End (cu in/revolution) | 16.5 |
| Shaft End Flow @ RPM | 37.5 |
| Rotation | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max | Outlet Opposite Inlet |
| Port Size | 3/4 in Flange |
| Port Type | 1 1/4 in Flange |
| Shaft Key | 2.22 |
| Shaft Type | 4.98 |
MSE18 Stator Cam Ring for Poclain Radial Piston Hydraulic Motor