Swing Motor 334-9968 3349968 for CAT Excavator 320C
| Pressure Port Size, Shaft End: | 75.0 LB |
| Weight: | Flange Mount |
| Shaft End Flow @ RPM: | Right Hand (CW) |
| Controlled Flow Rate: | 3520VQ30E11-11DD20 |
| Rotation: | 3 |
| Pressure Port Size, Cover End: | Flange |
| Minor Diameter: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
Product Details
| Pressure Port Size, Shaft End | 75.0 LB |
| Weight | Flange Mount |
| Shaft End Flow @ RPM | Right Hand (CW) |
| Controlled Flow Rate | 3520VQ30E11-11DD20 |
| Rotation | 3 |
| Pressure Port Size, Cover End | Flange |
| Minor Diameter | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Shaft Key | 1.25 in |
| Major Diameter [Min | 14 Tooth Splined |
| Port Size | 3520VQ |
| Mounting | 1 15/16 in |
| Spline Description | Double |
| Minor Diameter [Min | Buna-N |
| Port Type | 2500 |
| GPM @ 1,800 rpm, Cover End | 1.04 in |
| Major Diameter [Max | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Shaft Length | 12/24 |
| Cover End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Shaft End Pressure [Max | N/A |
| Shaft End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 1.248 in |
| Manufacturer Part No. | 1.247 in |
| Cover End RPM [Max | N/A |
| Pilot Type | N/A |
| Model No. | N/A |
| Relief Valve Setting | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 3520VQ30E11-11DD20 |
| Displacement Shaft End (cu in/revolution) | 6 |
| Seal Material | 3000 |
| Displacement Cover End (cu in/revolution) | 16.5 |
| Shaft Seal Type | 45 |
| Integral Valve Configuration | w/o Integral Valves |
| Pump Series | Outlet 135° CW from Inlet |
| Mounting Flange | Outlet 90° CW from Inlet |
| Shaft Dia. | 1 1/16 in SAE O-Ring |
| Cover End Flow @ RPM | 1 1/4 in Flange |
| Shaft Type | 2.2 |
MSE18 Stator Cam Ring for Poclain Radial Piston Hydraulic Motor