Factory Supply 3525V Series Low Noise 5 ton lorry crane hydraulic pump
| GPM @ 1,800 rpm, Shaft End: | 35.0 LB |
| Model No.: | Flange Mount |
| Shaft Type: | Right Hand (CW) |
| Seal Material: | V2020-1F13S9S-11DD30 |
| Mounting: | 2 |
| Weight: | Flange |
| Shaft Seal Type: | N/A |
| Mounting Flange: | N/A |
Product Details
| GPM @ 1,800 rpm, Shaft End | 35.0 LB |
| Model No. | Flange Mount |
| Shaft Type | Right Hand (CW) |
| Seal Material | V2020-1F13S9S-11DD30 |
| Mounting | 2 |
| Weight | Flange |
| Shaft Seal Type | N/A |
| Mounting Flange | N/A |
| Cover End Flow @ RPM | 0.875 in |
| Port Orientation - Cover End | 13 Tooth Splined |
| Pump Series | V2020 |
| Major Diameter [Max | 1 5/16 in |
| Shaft End Pressure [Max | Buna-N |
| Manufacturer Part No. | 2400 |
| Port Size | 0.728 in |
| Integral Valve Configuration | SAE B, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Minor Diameter | 16/32 |
| Port Type | 2800 |
| Displacement Cover End (cu in/revolution) | 2400 |
| Pressure Port Size, Shaft End | N/A |
| Cover End RPM [Max | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Rotation | 0.873 in |
| Port Orientation - Shaft End | 0.872 in |
| Shaft Key | 0.7335 in |
| Pilot Type | 0.7225 in |
| Spline Description | N/A |
| Cover End Pressure [Max | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | V2020-1F13S9S-11DD30 |
| Shaft Length | 2500 |
| Shaft End Flow @ RPM | 2200 |
| Controlled Flow Rate | 13.5 |
| Displacement Shaft End (cu in/revolution) | 19.5 |
| Shaft Dia. | N/A |
| Major Diameter [Min | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in SAE O-Ring |
| Minor Diameter [Max | 3/4 in SAE O-Ring |
| Relief Valve Setting | 1.81 |
| Max. RPM [Max | 2.59 |
MSE02 Rotor for Poclain Hydraulic Engine Motor Parts