KP1009CHFSS Hydraulic Gear Charge Pump for Cat E200B Excavator
Pilot Type: | 26.0 LB |
Mounting: | Flange Mount |
Relief Valve Setting: | Left Hand (CCW) |
Major Diameter [Min: | 20V11A-151C22L |
Shaft End Pressure [Max: | 1 1/2 |
Model No.: | Flange |
Displacement Shaft End (cu in/revolution): | N/A |
Pressure Port Size, Cover End: | 22 |
PDF |
|
Product Details
Pilot Type | 26.0 LB |
Mounting | Flange Mount |
Relief Valve Setting | Left Hand (CCW) |
Major Diameter [Min | 20V11A-151C22L |
Shaft End Pressure [Max | 1 1/2 |
Model No. | Flange |
Displacement Shaft End (cu in/revolution) | N/A |
Pressure Port Size, Cover End | 22 |
Rotation | 11 gpm @ 1200 rpm |
Weight | 151 |
GPM @ 1,800 rpm, Shaft End | 0.875 in |
Shaft Dia. | 13 Tooth Splined |
Port Type | 17 / 1800 |
Port Size | 20V |
Minor Diameter [Max | 1.25 in |
Shaft End RPM [Max | None |
Minor Diameter | 3/4 in Code 61 Flange |
Shaft End Flow @ RPM | Buna-N |
Pressure Port Size, Shaft End | 1800 |
Minor Diameter [Min | 3000 psi |
Major Diameter [Max | 16 1/2 |
Integral Valve Configuration | SAE B, 2 Bolt |
Cover End RPM [Max | Single Shaft Seal |
Shaft Length | Inline w/Inlet |
Controlled Flow Rate | 20V11A-151C22L |
Cover End Flow @ RPM | 2.22 |
Cover End Pressure [Max | w/o Integral Valves |