Swing Valve 158-9085 1589085 for CAT 318C
| Port Size: | 75.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Minor Diameter [Min: | Left Hand (CCW) |
| Mounting Flange: | 3520VQ25A8-11DC20L |
| Displacement Shaft End (cu in/revolution): | 3 |
| Shaft End Pressure [Max: | Flange |
| Cover End Flow @ RPM: | N/A |
| Displacement Cover End (cu in/revolution): | Standard Pilot |
Product Details
| Port Size | 75.0 LB |
| Minor Diameter [Max | Flange Mount |
| Minor Diameter [Min | Left Hand (CCW) |
| Mounting Flange | 3520VQ25A8-11DC20L |
| Displacement Shaft End (cu in/revolution) | 3 |
| Shaft End Pressure [Max | Flange |
| Cover End Flow @ RPM | N/A |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| GPM @ 1,800 rpm, Cover End | 1.25 in |
| Port Orientation - Shaft End | 14 Tooth Splined |
| Seal Material | 3520VQ |
| Pump Series | 1 15/16 in |
| Manufacturer Part No. | Buna-N |
| Relief Valve Setting | 2500 |
| Shaft Key | 1.04 in |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Shaft Length | Single Shaft Seal |
| Pressure Port Size, Cover End | 12/24 |
| Shaft End RPM [Max | 2500 |
| Controlled Flow Rate | 2500 |
| Shaft Dia. | N/A |
| Cover End RPM [Max | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Spline Description | 1.248 in |
| Shaft Seal Type | 1.247 in |
| Pressure Port Size, Shaft End | N/A |
| Major Diameter [Max | N/A |
| Shaft End Flow @ RPM | N/A |
| Minor Diameter | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Type | 3520VQ25A8-11DC20L |
| Weight | 3000 |
| Shaft Type | 3000 |
| Cover End Pressure [Max | 12 |
| Pilot Type | 37.5 |
| Major Diameter [Min | w/o Integral Valves |
| Max. RPM [Max | Outlet 45° CW from Inlet |
| Mounting | Outlet 90° CW from Inlet |
| Port Orientation - Cover End | 3/4 in Flange |
| Model No. | 1 1/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | 1.67 |
| Rotation | 4.98 |
MSE02 Rotor for Poclain Hydraulic Engine Motor Parts