3P4002 Cat Hydraulic Transfer Gear Oil Pump For Tractor D8H D9G
| Minor Diameter [Max: | 118.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Mounting Flange: | 4535V60A25-11AA22R |
| Seal Material: | 4 |
| Pilot Type: | Flange |
| Port Size: | N/A |
| Controlled Flow Rate: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max | 118.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Mounting Flange | 4535V60A25-11AA22R |
| Seal Material | 4 |
| Pilot Type | Flange |
| Port Size | N/A |
| Controlled Flow Rate | Standard Pilot |
| Shaft Dia. | 1.56 in |
| Model No. | 14 Tooth Splined |
| Shaft End Flow @ RPM | 4535V |
| Shaft End Pressure [Max | 2.4375 in |
| Port Orientation - Cover End | Buna-N |
| Cover End Flow @ RPM | 1800 |
| Pump Series | 1.055 in |
| Minor Diameter | SAE C, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Shaft End RPM [Max | 12/24 |
| Mounting | 1800 |
| Manufacturer Part No. | 1800 |
| Minor Diameter [Min | N/A |
| Weight | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 1.25 in |
| Shaft Key | 1.247 in |
| Major Diameter [Max | 1.06 in |
| Shaft Seal Type | 1.05 in |
| Integral Valve Configuration | N/A |
| Displacement Cover End (cu in/revolution) | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 4535V60A25-11AA22R |
| Cover End Pressure [Max | 2500 |
| Rotation | 2500 |
| Major Diameter [Min | 37.5 |
| Port Type | 90 |
| Max. RPM [Max | N/A |
| Relief Valve Setting | Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet Opposite Inlet |
| Shaft Length | 1 1/4 in Code 61 |
| Displacement Shaft End (cu in/revolution) | 1 1/2 in Code 61 |
| Pressure Port Size, Cover End | 4.9 |
| Shaft Type | 11.8 |
MSE02 Stator for Poclain Radial Piston Hydraulic motor parts