Hydraulic Gear Pump 705-12-32010 Steering Pump for Bulldozer D41A-3
| Minor Diameter: | 30.0 LB |
| Shaft Type: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
| Manufacturer Part No.: | V2010-1F7S6S-1BB12 |
| Weight: | 1 1/2 |
| Shaft End RPM [Max: | Flange |
| Minor Diameter [Min: | 3/16 in |
| GPM @ 1,800 rpm, Cover End: | N/A |
| PDF |
|
Product Details
| Minor Diameter | 30.0 LB |
| Shaft Type | Flange Mount |
| Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
| Manufacturer Part No. | V2010-1F7S6S-1BB12 |
| Weight | 1 1/2 |
| Shaft End RPM [Max | Flange |
| Minor Diameter [Min | 3/16 in |
| GPM @ 1,800 rpm, Cover End | N/A |
| Model No. | 0.875 in |
| Rotation | Straight w/ Key |
| Shaft End Flow @ RPM | V2010 |
| Integral Valve Configuration | 2.3125 in |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Shaft Seal Type | 3000 |
| Cover End RPM [Max | N/A |
| Cover End Flow @ RPM | SAE B, 2 Bolt |
| Port Type | Single Shaft Seal |
| Max. RPM [Max | N/A |
| Major Diameter [Min | 3000 |
| Pilot Type | 3000 |
| Shaft Dia. | N/A |
| Port Orientation - Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Pressure [Max | N/A |
| Relief Valve Setting | N/A |
| Shaft End Pressure [Max | N/A |
| Major Diameter [Max | N/A |
| Port Size | N/A |
| GPM @ 1,800 rpm, Shaft End | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Seal Material | V2010-1F7S6S-1BB12 |
| Controlled Flow Rate | 2200 |
| Mounting Flange | 2500 |
| Minor Diameter [Max | 9 |
| Shaft Key | 10.5 |
| Pump Series | N/A |
| Spline Description | Outlet 45° CCW from Inlet |
| Pressure Port Size, Cover End | Outlet 90° CCW from Inlet |
| Shaft Length | 1/2 in SAE O-Ring |
| Port Orientation - Cover End | 3/4 in SAE O-Ring |
| Mounting | 1.19 |
| Pressure Port Size, Shaft End | 1.39 |
PL42 PL44 Hydraulic Piston Motor Repair Parts for Poclain