WA470-3 WA450-3 Wheel Loader Work Equipment Gear Pump 705-52-40130
| Port Orientation - Cover End: | 75.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Model No.: | Right Hand (CW) |
| Shaft End Pressure [Max: | 3520VQ30A5-11DD20 |
| Pilot Type: | 3 |
| Shaft End RPM [Max: | Flange |
| Controlled Flow Rate: | N/A |
| Pump Series: | Standard Pilot |
Product Details
| Port Orientation - Cover End | 75.0 LB |
| Minor Diameter [Min | Flange Mount |
| Model No. | Right Hand (CW) |
| Shaft End Pressure [Max | 3520VQ30A5-11DD20 |
| Pilot Type | 3 |
| Shaft End RPM [Max | Flange |
| Controlled Flow Rate | N/A |
| Pump Series | Standard Pilot |
| Seal Material | 1.25 in |
| Rotation | 14 Tooth Splined |
| Relief Valve Setting | 3520VQ |
| Mounting | 1 15/16 in |
| Shaft Length | Buna-N |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Cover End RPM [Max | 1.04 in |
| Shaft Type | SAE C, 2 Bolt |
| Port Size | Single Shaft Seal |
| Port Orientation - Shaft End | 12/24 |
| Pressure Port Size, Cover End | 2500 |
| Weight | 2500 |
| Shaft Key | N/A |
| Port Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Shaft Dia. | 1.247 in |
| Displacement Cover End (cu in/revolution) | N/A |
| Mounting Flange | N/A |
| Integral Valve Configuration | N/A |
| Minor Diameter [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 3520VQ30A5-11DD20 |
| Max. RPM [Max | 3000 |
| Spline Description | 3000 |
| Manufacturer Part No. | 7.5 |
| Shaft Seal Type | 45 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Major Diameter [Min | 3/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 1 1/4 in Flange |
| Minor Diameter | 1.1 |
| Shaft End Flow @ RPM | 5.96 |
PL42 PL44 Hydraulic Piston Motor Repair Parts for Poclain