Hydraulic Transmission Gear Pump 121-7385 for CAT 416C 416D Backhoe Loader
| Manufacturer Part No.: | 30.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| Spline Description: | V2010-1F13S3S-1BA12 |
| Minor Diameter [Max: | 1 1/2 |
| Controlled Flow Rate: | Flange |
| Port Type: | 3/16 in |
| Minor Diameter: | N/A |
Product Details
| Manufacturer Part No. | 30.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| Spline Description | V2010-1F13S3S-1BA12 |
| Minor Diameter [Max | 1 1/2 |
| Controlled Flow Rate | Flange |
| Port Type | 3/16 in |
| Minor Diameter | N/A |
| Pilot Type | 0.875 in |
| Major Diameter [Min | Straight w/ Key |
| Pump Series | V2010 |
| Cover End RPM [Max | 2 5/16 in |
| Pressure Port Size, Shaft End | Buna-N |
| Pressure Port Size, Cover End | 2400 |
| Relief Valve Setting | N/A |
| Integral Valve Configuration | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Shaft Dia. | N/A |
| Seal Material | 3000 |
| Shaft Seal Type | 2400 |
| Mounting Flange | N/A |
| Displacement Shaft End (cu in/revolution) | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | N/A |
| Model No. | N/A |
| Max. RPM [Max | N/A |
| Shaft Type | N/A |
| Shaft Key | N/A |
| Rotation | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Major Diameter [Max | V2010-1F13S3S-1BA12 |
| Cover End Flow @ RPM | 2500 |
| Mounting | 2200 |
| Cover End Pressure [Max | 4.5 |
| GPM @ 1,800 rpm, Cover End | 19.5 |
| Shaft End Flow @ RPM | N/A |
| Port Size | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Port Orientation - Cover End | 1/2 in SAE O-Ring |
| Shaft Length | 3/4 in SAE O-Ring |
| Minor Diameter [Min | 0.6 |
| Weight | 2.59 |
PL42 PL44 Hydraulic Piston Motor Repair Parts for Poclain