Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Spline Description: | 45.0 LB |
| Model No.: | Flange Mount |
| Minor Diameter [Max: | Left Hand (CCW) |
| Mounting: | 2520VQ17A14-11CC20-LH |
| Pilot Type: | 2.5 |
| Shaft End RPM [Max: | Flange |
| Manufacturer Part No.: | N/A |
| Controlled Flow Rate: | Standard Pilot |
| PDF |
|
Product Details
| Spline Description | 45.0 LB |
| Model No. | Flange Mount |
| Minor Diameter [Max | Left Hand (CCW) |
| Mounting | 2520VQ17A14-11CC20-LH |
| Pilot Type | 2.5 |
| Shaft End RPM [Max | Flange |
| Manufacturer Part No. | N/A |
| Controlled Flow Rate | Standard Pilot |
| Port Type | 0.875 in |
| Cover End Pressure [Max | 13 Tooth Splined |
| Weight | 2520VQ |
| Max. RPM [Max | 1.375 in |
| Shaft Seal Type | Double |
| Shaft Length | Buna-N |
| Minor Diameter | 2500 |
| GPM @ 1,800 rpm, Cover End | 0.715 in |
| GPM @ 1,800 rpm, Shaft End | SAE B, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Port Orientation - Shaft End | 16/32 |
| Pressure Port Size, Cover End | 2700 |
| Pump Series | 2500 |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Seal Material | 0.873 in |
| Mounting Flange | 0.872 in |
| Shaft End Flow @ RPM | N/A |
| Port Size | N/A |
| Shaft Key | N/A |
| Cover End RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Dia. | 2520VQ17A14-11CC20-LH |
| Displacement Cover End (cu in/revolution) | 2000 |
| Cover End Flow @ RPM | 3000 |
| Displacement Shaft End (cu in/revolution) | 3.4 |
| Integral Valve Configuration | 25.5 |
| Rotation | w/o Integral Valves |
| Major Diameter [Min | Outlet 45° CW from Inlet |
| Port Orientation - Cover End | Outlet Inline w/Inlet |
| Major Diameter [Max | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 in Flange |
| Shaft Type | 2.8 |
Poclain PL42 PL44 Piston Shoe Hydraulic Motor Spare Parts