CAT Cooling Hydraulic Engine Water Pump Assembly 2W8001 For Excavator Diesel Engine 3304 3306
| Weight: | 75.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Minor Diameter: | Right Hand (CW) |
| Shaft End Pressure [Max: | 3520VQ30A5-11DD20 |
| Seal Material: | 3 |
| Port Type: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Controlled Flow Rate: | Standard Pilot |
| PDF |
|
Product Details
| Weight | 75.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Minor Diameter | Right Hand (CW) |
| Shaft End Pressure [Max | 3520VQ30A5-11DD20 |
| Seal Material | 3 |
| Port Type | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Controlled Flow Rate | Standard Pilot |
| Shaft Seal Type | 1.25 in |
| Shaft Dia. | 14 Tooth Splined |
| Cover End Flow @ RPM | 3520VQ |
| Relief Valve Setting | 1 15/16 in |
| Shaft Type | Buna-N |
| Pilot Type | 2500 |
| Spline Description | 1.04 in |
| GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
| Major Diameter [Max | Single Shaft Seal |
| Minor Diameter [Min | 12/24 |
| Pressure Port Size, Shaft End | 2500 |
| Mounting Flange | 2500 |
| Pressure Port Size, Cover End | N/A |
| Shaft End Flow @ RPM | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.248 in |
| Max. RPM [Max | 1.247 in |
| Shaft Key | N/A |
| Integral Valve Configuration | N/A |
| Mounting | N/A |
| Shaft Length | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Model No. | 3520VQ30A5-11DD20 |
| Rotation | 3000 |
| Shaft End RPM [Max | 3000 |
| Major Diameter [Min | 7.5 |
| Minor Diameter [Max | 45 |
| Port Orientation - Cover End | w/o Integral Valves |
| Cover End Pressure [Max | Outlet 135° CW from Inlet |
| Manufacturer Part No. | Outlet 90° CW from Inlet |
| Cover End RPM [Max | 3/4 in Flange |
| Port Orientation - Shaft End | 1 1/4 in Flange |
| Pump Series | 1.1 |
| Port Size | 5.96 |
Poclain PL42 PL44 Piston Shoe Hydraulic Motor Spare Parts