9J8660 Barrel Cylinder Block for Cat 12G/120G/130G/140G/160G Grader Main Piston Pump
| Major Diameter [Min: | 30.0 LB |
| Mounting: | Flange Mount |
| Max. RPM [Max: | Right Hand (CW) |
| Seal Material: | V2010-1F6S2S-11AA12 |
| Model No.: | 1.5 |
| Minor Diameter [Max: | Flange |
| Pump Series: | N/A |
| Integral Valve Configuration: | N/A |
Product Details
| Major Diameter [Min | 30.0 LB |
| Mounting | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Seal Material | V2010-1F6S2S-11AA12 |
| Model No. | 1.5 |
| Minor Diameter [Max | Flange |
| Pump Series | N/A |
| Integral Valve Configuration | N/A |
| Port Orientation - Shaft End | 0.875 in |
| Port Size | 13 Tooth Splined |
| Cover End Flow @ RPM | V2010 |
| GPM @ 1,800 rpm, Shaft End | 1 5/16 in |
| Pilot Type | Double |
| Shaft Key | Buna-N |
| Cover End RPM [Max | 3000 |
| Relief Valve Setting | 0.728 in |
| Port Type | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Shaft End RPM [Max | 16/32 |
| Shaft Seal Type | 3000 |
| Cover End Pressure [Max | 3000 |
| Controlled Flow Rate | N/A |
| Shaft Type | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Shaft Length | 0.873 in |
| Displacement Shaft End (cu in/revolution) | 1.2 |
| Mounting Flange | 0.734 in |
| Pressure Port Size, Shaft End | 0.723 in |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft End Flow @ RPM | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | V2010-1F6S2S-11AA12 |
| Manufacturer Part No. | 2500 |
| Weight | 2500 |
| Major Diameter [Max | 3 |
| Rotation | 9 |
| Minor Diameter | N/A |
| Minor Diameter [Min | Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max | Outlet Opposite Inlet |
| Port Orientation - Cover End | 1/2 in SAE O-Ring |
| Shaft Dia. | 3/4 in SAE O-Ring |
| Spline Description | 0.4 |
Poclain PL42 PL44 Piston Shoe Hydraulic Motor Spare Parts