Rexroth PVV2-1X/068RA15DMB Vane pump
With over 10170 full-service stores, our Rexroth PVV2-1X/068RA15DMB Vane pump inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving Normal Duty Bearing Duty time and your 782476673529 UPC hard-earned dollars.
What is PVV2-1X/068RA15DMB bearing interchange?
Brand Name: | Rexroth |
Model Number: | PVV2-1X/068RA15DMB |
Shaft Dia.: | 45.0 LB |
Seal Material: | Flange Mount |
Mounting: | Left Hand (CCW) |
Pilot Type: | 2520VQ21C12-11AA20-LH |
Cover End RPM [Max: | 2 1/2 |
Major Diameter [Min: | Flange |
Pump Series: | N/A |
Major Diameter [Max: | Standard Pilot |
Product Details
Shaft Dia. | 45.0 LB |
Seal Material | Flange Mount |
Mounting | Left Hand (CCW) |
Pilot Type | 2520VQ21C12-11AA20-LH |
Cover End RPM [Max | 2 1/2 |
Major Diameter [Min | Flange |
Pump Series | N/A |
Major Diameter [Max | Standard Pilot |
Cover End Flow @ RPM | 0.875 in |
Shaft Length | 13 Tooth Splined |
Minor Diameter [Max | 2520VQ |
Minor Diameter [Min | 1.375 in |
Mounting Flange | Buna-N |
Port Size | 2500 |
Shaft Key | 0.715 in |
Spline Description | SAE B, 2 Bolt |
Shaft Type | Single Shaft Seal |
Displacement Cover End (cu in/revolution) | 16/32 |
Manufacturer Part No. | 2700 |
Minor Diameter | 2500 |
GPM @ 1,800 rpm, Shaft End | N/A |
Port Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Max. RPM [Max | 0.873 in |
Cover End Pressure [Max | 0.872 in |
Shaft End Pressure [Max | N/A |
Rotation | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Port Orientation - Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 2520VQ21C12-11AA20-LH |
Shaft End Flow @ RPM | 2300 |
Model No. | 3000 |
Weight | 18 |
Port Orientation - Cover End | 31.5 |
Controlled Flow Rate | w/o Integral Valves |
Pressure Port Size, Cover End | Outlet 135° CCW from Inlet |
Relief Valve Setting | Outlet Opposite Inlet |
Displacement Shaft End (cu in/revolution) | 1 1/16 in SAE O-Ring |
Shaft Seal Type | 1 5/16 in SAE O-Ring |
Pressure Port Size, Shaft End | 2.41 |
Integral Valve Configuration | 4.12 |