Yuken A56-F-R-04-H-K-32393 Piston pump
With over 10170 full-service stores, our Yuken A56-F-R-04-H-K-32393 Piston pump 18 mm H1 inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize 90 mm H your productivity by saving time and your hard-earned PH206N- Designation of housing dollars.
| Brand Name: | Yuken |
| Model Number: | A56-F-R-04-H-K-32393 |
| Weight: | 75.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Shaft Dia.: | 3520VQ38A11-11DD20 |
| Minor Diameter: | 3 |
| Spline Description: | Flange |
| Cover End Pressure [Max: | N/A |
| Shaft Type: | Standard Pilot |
Product Details
| Weight | 75.0 LB |
| Shaft End RPM [Max | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Shaft Dia. | 3520VQ38A11-11DD20 |
| Minor Diameter | 3 |
| Spline Description | Flange |
| Cover End Pressure [Max | N/A |
| Shaft Type | Standard Pilot |
| Port Type | 1.25 in |
| Model No. | 14 Tooth Splined |
| Shaft End Flow @ RPM | 3520VQ |
| Relief Valve Setting | 1.9375 in |
| Port Size | Double |
| Rotation | Buna-N |
| Port Orientation - Shaft End | 2400 |
| Mounting Flange | 1.04 in |
| Minor Diameter [Max | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Pump Series | 12/24 |
| Max. RPM [Max | 2500 |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Cover End RPM [Max | N/A |
| Major Diameter [Min | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | 1.248 in |
| Pressure Port Size, Shaft End | 1.247 in |
| Shaft Key | N/A |
| Seal Material | N/A |
| Shaft Length | N/A |
| Integral Valve Configuration | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Min | 3520VQ38A11-11DD20 |
| Major Diameter [Max | 3000 |
| Pilot Type | 3000 |
| Controlled Flow Rate | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 57 |
| Mounting | w/o Integral Valves |
| Shaft End Pressure [Max | Outlet 135° CW from Inlet |
| Port Orientation - Cover End | Outlet 90° CW from Inlet |
| Displacement Cover End (cu in/revolution) | 3/4 in Flange |
| Manufacturer Part No. | 1 1/4 in Flange |
| Shaft Seal Type | 2.2 |
