HGP-3A HGP3A Hydraulic Gear Pump HGP For Small Cylinder
| Mounting Flange: |
75.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
6 |
| Minor Diameter [Max: |
3 |
| Shaft Length: |
Flange |
| Weight: |
5/16 in |
| Cover End Flow @ RPM: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange |
75.0 LB |
| Integral Valve Configuration |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
6 |
| Minor Diameter [Max |
3 |
| Shaft Length |
Flange |
| Weight |
5/16 in |
| Cover End Flow @ RPM |
Standard Pilot |
| Rotation |
1.25 in |
| Shaft Type |
Straight w/ Key |
| Cover End Pressure [Max |
3520VQ |
| Displacement Cover End (cu in/revolution) |
2 1/2 in |
| Manufacturer Part No. |
Double |
| Shaft Seal Type |
Buna-N |
| Relief Valve Setting |
2500 |
| Shaft End RPM [Max |
N/A |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Seal Material |
N/A |
| Model No. |
2500 |
| Pump Series |
2500 |
| Port Size |
N/A |
| Port Type |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
N/A |
| Mounting |
N/A |
| Controlled Flow Rate |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter |
N/A |
| Shaft End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Pilot Type |
3520VQ30A11-1CC20 |
| Major Diameter [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Port Orientation - Shaft End |
16.5 |
| Shaft Dia. |
45 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Spline Description |
Outlet 45° CW from Inlet |
| Minor Diameter [Min |
Outlet Inline w/Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Port Orientation - Cover End |
1 1/4 in Flange |
| Shaft Key |
2.2 |