Piston Body 8N3102 for Caterpillar Engine 3306
| Displacement Shaft End (cu in/revolution): |
35.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Weight: |
Left Hand (CCW) |
| Controlled Flow Rate: |
V2020-1F9S7S-1AA30-LH |
| Pump Series: |
2 |
| Port Size: |
Flange |
| Major Diameter [Min: |
3/16 in |
| Seal Material: |
N/A |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) |
35.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Weight |
Left Hand (CCW) |
| Controlled Flow Rate |
V2020-1F9S7S-1AA30-LH |
| Pump Series |
2 |
| Port Size |
Flange |
| Major Diameter [Min |
3/16 in |
| Seal Material |
N/A |
| Pressure Port Size, Cover End |
0.875 in |
| Major Diameter [Max |
Straight w/ Key |
| Port Orientation - Cover End |
V2020 |
| Shaft End Pressure [Max |
2 5/16 in |
| Rotation |
Buna-N |
| Cover End Flow @ RPM |
2800 |
| Shaft Dia. |
N/A |
| Pressure Port Size, Shaft End |
SAE B, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Shaft Type |
N/A |
| Displacement Cover End (cu in/revolution) |
2500 |
| Minor Diameter [Max |
2800 |
| Spline Description |
N/A |
| Model No. |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
N/A |
| Shaft Seal Type |
N/A |
| Mounting |
N/A |
| Pilot Type |
N/A |
| Minor Diameter |
N/A |
| Port Orientation - Shaft End |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
V2020-1F9S7S-1AA30-LH |
| Max. RPM [Max |
2500 |
| Shaft Key |
2500 |
| Mounting Flange |
10.5 |
| Minor Diameter [Min |
13.5 |
| Relief Valve Setting |
N/A |
| Shaft Length |
Outlet Opposite Inlet |
| Shaft End RPM [Max |
Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Shaft End |
3/4 in SAE O-Ring |
| Cover End RPM [Max |
3/4 in SAE O-Ring |
| Port Type |
1.39 |
| Manufacturer Part No. |
1.81 |