Cold Planer Lubrication System Engine Oil Pump Group 6N1030 0R4999
| Pressure Port Size, Shaft End: |
45.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Model No.: |
Right Hand (CW) |
| Relief Valve Setting: |
2520VQ21A12-11CC20 |
| Max. RPM [Max: |
2.5 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Weight: |
N/A |
| Port Orientation - Shaft End: |
Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End |
45.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Model No. |
Right Hand (CW) |
| Relief Valve Setting |
2520VQ21A12-11CC20 |
| Max. RPM [Max |
2.5 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Weight |
N/A |
| Port Orientation - Shaft End |
Standard Pilot |
| Shaft Seal Type |
0.875 in |
| Minor Diameter |
13 Tooth Splined |
| Pressure Port Size, Cover End |
2520VQ |
| Port Orientation - Cover End |
1.375 in |
| Port Type |
Double |
| Cover End Flow @ RPM |
Buna-N |
| Cover End RPM [Max |
2500 |
| GPM @ 1,800 rpm, Shaft End |
0.715 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Mounting |
16/32 |
| Controlled Flow Rate |
2700 |
| Pump Series |
2500 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Major Diameter [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Dia. |
0.873 in |
| Manufacturer Part No. |
0.872 in |
| Spline Description |
N/A |
| Pilot Type |
N/A |
| Rotation |
N/A |
| Seal Material |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
2520VQ21A12-11CC20 |
| Port Size |
2300 |
| Minor Diameter [Max |
3000 |
| Integral Valve Configuration |
18 |
| Major Diameter [Min |
31.5 |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Shaft End RPM [Max |
Outlet 45° CW from Inlet |
| Shaft Type |
Outlet Inline w/Inlet |
| Shaft Length |
3/4 in Flange |
| Cover End Pressure [Max |
1 in Flange |
| Shaft Key |
2.4 |