3S4386 Hydraulic Loader Steering pump for Cat 955 D5B
| Minor Diameter: |
32.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
25VQ12A-11A20 |
| Cover End Pressure [Max: |
1 1/2 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Pilot Type: |
N/A |
| Relief Valve Setting: |
20 |
Product Details
| Minor Diameter |
32.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
25VQ12A-11A20 |
| Cover End Pressure [Max |
1 1/2 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Pilot Type |
N/A |
| Relief Valve Setting |
20 |
| Rotation |
12 gpm @ 1200 rpm |
| Minor Diameter [Min |
11 |
| Integral Valve Configuration |
0.875 in |
| Shaft End Flow @ RPM |
13 Tooth Splined |
| Port Orientation - Cover End |
18 gpm @ 1800 rpm |
| Manufacturer Part No. |
25VQ |
| Shaft Length |
1 3/8 in |
| Pressure Port Size, Cover End |
None |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Weight |
Buna-N |
| Seal Material |
2700 |
| Shaft Key |
3000 psi |
| Mounting |
18 |
| Major Diameter [Min |
A |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Cover End RPM [Max |
Opposite Inlet Port |
| Shaft Seal Type |
25VQ12A-11A20 |
| GPM @ 1,800 rpm, Cover End |
2.45 |
| Port Type |
w/o Integral Valves |