Excavator 4HK1 Engine Water Pump 8-98022872-1 for ZAX200-3
| Port Orientation - Shaft End: |
76.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Cover End RPM [Max: |
Left Hand (CCW) |
| Seal Material: |
3525V35A17-86CA22L |
| Spline Description: |
3 |
| Shaft End RPM [Max: |
Flange |
| Shaft End Pressure [Max: |
5/16 in |
| Max. RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Shaft End |
76.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Cover End RPM [Max |
Left Hand (CCW) |
| Seal Material |
3525V35A17-86CA22L |
| Spline Description |
3 |
| Shaft End RPM [Max |
Flange |
| Shaft End Pressure [Max |
5/16 in |
| Max. RPM [Max |
Standard Pilot |
| Shaft Type |
1.375 in |
| Port Orientation - Cover End |
Straight w/ Key |
| Weight |
3525V |
| Shaft Key |
3 7/8 in |
| Displacement Shaft End (cu in/revolution) |
Buna-N |
| Shaft Dia. |
1800 |
| Pressure Port Size, Shaft End |
N/A |
| Minor Diameter [Min |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Relief Valve Setting |
N/A |
| Minor Diameter [Max |
1800 |
| Shaft Seal Type |
1800 |
| Cover End Flow @ RPM |
N/A |
| Cover End Pressure [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Mounting Flange |
N/A |
| Rotation |
N/A |
| Model No. |
N/A |
| Pump Series |
N/A |
| Controlled Flow Rate |
N/A |
| Pilot Type |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft Length |
3525V35A17-86CA22L |
| Displacement Cover End (cu in/revolution) |
2500 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Port Size |
25.5 |
| Major Diameter [Min |
52.5 |
| Minor Diameter |
N/A |
| Manufacturer Part No. |
Outlet 135° CCW from Inlet |
| Port Type |
Outlet Inline w/Inlet |
| Integral Valve Configuration |
1 in Code 61 |
| Shaft End Flow @ RPM |
1 1/4 in Code 61 |
| Major Diameter [Max |
3.4 |
| Pressure Port Size, Cover End |
6.8 |