PC400-8 Excavator 6D125 diesel engine cooling water pump 6251-61-1102
| Pressure Port Size, Shaft End: |
118.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Pilot Type: |
Right Hand (CW) |
| Shaft End Pressure [Max: |
4535V42A25-11DD22R |
| Controlled Flow Rate: |
4 |
| Port Orientation - Cover End: |
Flange |
| Minor Diameter [Min: |
N/A |
| Shaft Seal Type: |
Standard Pilot |
Product Details
| Pressure Port Size, Shaft End |
118.0 LB |
| Relief Valve Setting |
Flange Mount |
| Pilot Type |
Right Hand (CW) |
| Shaft End Pressure [Max |
4535V42A25-11DD22R |
| Controlled Flow Rate |
4 |
| Port Orientation - Cover End |
Flange |
| Minor Diameter [Min |
N/A |
| Shaft Seal Type |
Standard Pilot |
| Minor Diameter |
1.56 in |
| Integral Valve Configuration |
14 Tooth Splined |
| Shaft End RPM [Max |
4535V |
| Shaft Type |
2.4375 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Mounting |
1800 |
| Displacement Shaft End (cu in/revolution) |
1.055 in |
| Shaft End Flow @ RPM |
SAE C, 2 Bolt |
| Minor Diameter [Max |
Single Shaft Seal |
| Major Diameter [Max |
12/24 |
| Shaft Key |
1800 |
| Port Type |
1800 |
| Pressure Port Size, Cover End |
N/A |
| Pump Series |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Weight |
1.25 in |
| Max. RPM [Max |
1.247 in |
| Shaft Dia. |
1.06 in |
| Shaft Length |
1.05 in |
| Cover End Pressure [Max |
N/A |
| Spline Description |
42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Seal Material |
4535V42A25-11DD22R |
| Mounting Flange |
2500 |
| Cover End Flow @ RPM |
2500 |
| Port Size |
37.5 |
| Port Orientation - Shaft End |
63 |
| Manufacturer Part No. |
N/A |
| Major Diameter [Min |
Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
Outlet 90° CW from Inlet |
| Model No. |
1 1/4 in Code 61 |
| Displacement Cover End (cu in/revolution) |
1 1/2 in Code 61 |
| Cover End RPM [Max |
4.9 |
| Rotation |
8.4 |