3848612 Oil Transfer Gear Pump for Cat Engine C13/C15/C16/C18 3400
| Pressure Port Size, Cover End: |
45.0 LB |
| Pilot Type: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Port Size: |
2520VQ17A8-11DC20 |
| Pump Series: |
2 1/2 |
| Mounting Flange: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Pressure Port Size, Shaft End: |
Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Cover End |
45.0 LB |
| Pilot Type |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Port Size |
2520VQ17A8-11DC20 |
| Pump Series |
2 1/2 |
| Mounting Flange |
Flange |
| Cover End Flow @ RPM |
N/A |
| Pressure Port Size, Shaft End |
Standard Pilot |
| Minor Diameter [Max |
0.875 in |
| Major Diameter [Max |
13 Tooth Splined |
| Integral Valve Configuration |
2520VQ |
| Major Diameter [Min |
1 3/8 in |
| Weight |
Buna-N |
| Cover End RPM [Max |
2500 |
| Rotation |
0.715 in |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Relief Valve Setting |
16/32 |
| Controlled Flow Rate |
2700 |
| Shaft End Flow @ RPM |
2500 |
| Shaft Key |
N/A |
| Seal Material |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
0.873 in |
| Minor Diameter [Min |
0.872 in |
| Shaft End RPM [Max |
N/A |
| Spline Description |
N/A |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Cover End |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Length |
2520VQ17A8-11DC20 |
| Port Type |
3000 |
| Shaft End Pressure [Max |
3000 |
| Port Orientation - Shaft End |
12 |
| Shaft Type |
25.5 |
| Max. RPM [Max |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 45° CW from Inlet |
| Manufacturer Part No. |
Outlet 90° CW from Inlet |
| Cover End Pressure [Max |
3/4 in Flange |
| Shaft Dia. |
1 in Flange |
| Mounting |
1.67 |
| Port Orientation - Cover End |
3.37 |