HGP-2A Replace Hydromax Extrusion Oil Gear Pump HGP2A
| Max. RPM [Max: |
76.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Integral Valve Configuration: |
Right Hand (CW) |
| Major Diameter [Max: |
3525VQ38A14-11AA20 |
| Manufacturer Part No.: |
3 |
| Shaft Dia.: |
Flange |
| Rotation: |
N/A |
| Cover End Pressure [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Max. RPM [Max |
76.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Integral Valve Configuration |
Right Hand (CW) |
| Major Diameter [Max |
3525VQ38A14-11AA20 |
| Manufacturer Part No. |
3 |
| Shaft Dia. |
Flange |
| Rotation |
N/A |
| Cover End Pressure [Max |
Standard Pilot |
| Pump Series |
1.25 in |
| Major Diameter [Min |
14 Tooth Splined |
| Spline Description |
3525VQ |
| Port Orientation - Shaft End |
1 15/16 in |
| Minor Diameter [Min |
Double |
| Shaft Length |
Buna-N |
| Model No. |
2400 |
| Pressure Port Size, Cover End |
1.04 in |
| Weight |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Port Size |
2500 |
| GPM @ 1,800 rpm, Shaft End |
2400 |
| Cover End Flow @ RPM |
N/A |
| Shaft End Pressure [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pilot Type |
1.248 in |
| Shaft End Flow @ RPM |
1.247 in |
| Pressure Port Size, Shaft End |
N/A |
| Minor Diameter |
N/A |
| Relief Valve Setting |
N/A |
| Controlled Flow Rate |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
3525VQ38A14-11AA20 |
| Mounting Flange |
3000 |
| Shaft End RPM [Max |
3000 |
| Shaft Seal Type |
21 |
| Minor Diameter [Max |
57 |
| Port Type |
w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Displacement Cover End (cu in/revolution) |
Outlet Opposite Inlet |
| Shaft Type |
1 in Flange |
| Seal Material |
1 1/4 in Flange |
| Cover End RPM [Max |
2.8 |